4 Adjust the recording level.
Refer to page 21, step 4 “Adjust the recording level.”
5 Stop the playback of the recording source.
6 Press the oREC button.The
REC | REC |
To use auto finalization, press the FINALIZE button repeatedly during recording until “Auto On” appears. (The FINALIZE indicator appears flashing.) Finalization starts automatically when the
You cannot use auto finalization. This is because the disc has track names but it has no disc name.
Follow the steps below to finalize.
1.Enter a disc name after recording completes (see page 28).
2.Press the FINALIZE button to finalize the disc (see page 33).
Note:
If “Check Level” flashes and recording does not start, then the recording source was likely already playing and not allowing recording to start. First stop the recording source and then resume operations.
7 Verify that “Signal Wait” is flashing together with the time display and then start the playback of the recording source.
Recording starts as soon as the
Press the FINALIZE button repeatedly until “Auto Off” appears. (The FINALIZE indicator disappears.)
Notes on the signal synchronous recording•When the level sync function is turned on during analog recording, the track numbers are updated automatically as soon as audible sound is detected after 2 seconds or more of silence.
•If placed in the state of “Signal Wait” for 1 minute, the
When the auto finalization is turned on, finalization automatically starts.
•When “D.In Unlock” appears in the front display during the signal synchronous recording (digital input), the
•When the signal synchronous recording is performed with an Onkyo CD player connected to the
not stop the
23