Manuals / Brands / Home Audio / CD Player / Onkyo / Home Audio / CD Player

Onkyo DX-R700 Synchronous recording, 3 Press the oREC button, When the playback finishes, 4 Adjust the recording level, To stop the synchronous recording

1 48

Download 48 pages, 969.03 Kb

Synchronous recording

3 Press the oREC button.

DX-R700RC-448C

REC

REC

“Rec Setup” appears in the display followed by the time display (the recording standby state). Proceed to step 6 if you do not wish to adjust the recording level.

4 Adjust the recording level.

Refer to page 21, step 4 “Adjust the recording level.”

5 Stop the playback of the source device.6 Press the play button on the source device to start the playback.

Playing starts and recording starts at the DX- R700.

When the playback finishes

Only when you perform the digital synchronous recording from the CD player, the DX-R700 will go into the recording standby state. After the recording standby state lasts 10 minutes, the DX-R700 will stop automatically.

In any other recordings, you will have to stop the recording manually using the eSTOP button on the DX-R700.

To stop the synchronous recording

Press the eSTOP button on the DX-R700. When you are performing the digital synchronous recording from the CD player, the stop of the CD playback will cause the DX-R700 to enter the recording standby state.

While performing analog recording, do not switch the input selector control on the amplifier.

25

Contents

Contents Audio CD Recorder Before using Connections Operations16 Thank you for purchasing Main Features WARNING: CAUTION: Important Safeguards Ventilation – Grounding or Polarization – Power-Cord Overloading – Precautions Precautions DANGER: CAUTION: For U.S. model FCC INFORMATION FOR USER Page Table of contents Before Using Connections Operations Other Information Part names and functions Front panel Rear panel RC-448Cremote controller Using the remote controller ■Using the RC-448Cremote controller Installing the remote controller batteries Using the remote controller Notes on usable CDs Notes on discs Connections Connecting the DX-R700 ■Connecting to other components Protection cap for the optical digital input terminal Connecting the DX-R700 1Connecting to an amplifier 2Connecting the zcable 3Connecting to the digital input 4Connecting to the digital output Turning on the power Connecting the power cord Turning the power on Inserting a disc Recording modes Cautions during recording About the level sync function Name function Finalization Erasing recording (CD-RWdiscs only) Digital recording/Analog recording Digital recording/Analog recording 4 Adjust the recording level (1) (2)Press the MULTI JOG dial (3)Turn the MULTI JOG dial to adjust the recording level as desired Synchronous recording by input signal detection (Signal synchronous recording) 1 Repeatedly press the INPUT button and select the desired input signal Synchronous recording by input signal detection (Signal synchronous recording) 6 Press the oREC button Auto finalization •If “Name Disc” appears when you press the FINALIZE button To cancel auto finalization Synchronous recording Synchronous recording to the DX-R700 Synchronous recording 5 Stop the playback of the source device 6 Press the play button on the source device to start the playback When the playback finishes To stop the synchronous recording Using the level sync function Using the level sync function Changing the display Display during recording Entering names Entering a disc name or artist name Entering names 4 Enter a name Types of available easy names To change the type of input characters Using the remote controller (RC-448C)for entering names •Entering an alphabetic character •Entering an easy name To insert a character To erase a character Entering track names Erasing the disc name, artist name, and track names Finalization Erasing recordings (CD-RWdiscs only) Erasing data on non-finalized CD-RWs Erasing recordings (CD-RWdiscs only) ■Erasing the last track or tracks from the selected track to the last track 1 Turn the MULTI JOG dial and select the track to be erased If the selected track is the last track If the selected track is the first track Erasing data on finalized CD-RWs Erasing entire disc Playing CDs Normal playback Playing CDs Random playback Repeat playback With playback stopped, press the RANDOM button Press the REPEAT button as many times as desired Programmed playback Listening with the headphones Other Information Rules concerning digital recording Display messages Troubleshooting guide Troubleshooting guide Messages during recording (continued) Messages during playback, name input, and other situations Messages during playback, name input, and other situations (continued) Specifications Memo ONKYO U.S.A. CORPORATION ONKYO EUROPE ELECTRONICS GmbH ONKYO CHINA LIMITED