Onkyo DX-R700 Finalization, Memo:, Notes:, FINALIZE Flashing, Auto finalization, After finalization, When finalization finishes, Display after finalization

Finalization

			DUAL DIGITAL INPUT
STANDBY/ON						PAUSE	STOP		PLAY
	MEMORY	CLEAR	DISPLAY	MULTI JOG	INPUT
STANDBY							PHONES	PHONES LEVEL
POWER	REPEAT	FINALIZE	EDIT/ NO		YES	REC
								MIN	MAX
ON OFF							AUDIO CD RECORDER		DX-R700

FINALIZEYES

Finalization is a process of writing the TOC data (track numbers etc.) and the name information retained in the DX-R700 to the special area (PMA) of the disc.

After finalization

CD-Rs can be played in CD players. Even after finalization, CD-RWs can only be played on CD players that are compatible with CD-RWs.

For finalized CD-Rs, you cannot add more recordings and name information.

1 Insert the CD-R or CD-RW to be finalized into the DX-R700.2 Press the FINALIZE button.

FINALIZE

FINALIZE Flashing

After showing “Finalize,” the display shows, for example, “Ok? -1m58s” together with the time information.

Memo:

The DX-R700 will stop, if this state persists for 10 minutes or more.

3 After the time information appears, press the YES button.

YES

When finalization finishes

The DX-R700 automatically stops.

To stop the finalization process

Press the eSTOP button or the EDIT/NO button (before pressing the YES button in step 3).

Display after finalization

For CD-Rs, the display becomes that for CDs. For CD-RWs, the display does not change, except that FINALIZE is added.

Notes:

•You cannot finalize your disc which may have an artist name or track titles but no disc name on it. With such a disc, “Name Disc” will appear when you press the FINALIZE button. In this case, enter a disc name before finalizing the disc (see page 28).

•Never turn off the power or remove the power cord during finalization. Doing so may damage all the data on the disc. An inserted disc can be corrupt and no longer usable if the power is accidentally turned off or in case of power failure.

•Never finalize discs that are scratched, dirty, or dusty. Doing so may prevent the process from being properly completed. If the process does not finish in 10 minutes, press the eSTOP button and abort the process. This disc will not be able to be played with normal CD players.

•During finalization, the operation button on the DX-R700 will be disabled.

Finalization begins. During finalization, the remaining time is displayed. (Finalization takes approx. 2 minutes.)

Auto finalization

You can perform auto finalization during synchronous recording by input signal detection (see page 22). When auto finalization is turned on, finalization occurs automatically at the end of recording. For details, refer to the applicable pages.

33