Onkyo HT-S5300 Hdmi Input, Component Component Video Input, Digital Audio Digital Audio Input

Explanatory Notes
a	Menu	Sp Config
b	Subwoofer
c	Yes:

Select if a subwoofer is connected.

No:

Select if no subwoofer is connected.

aMenu selection

bSetting target

cSetting options (default setting underlined)

HDMI Input

Menu HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI1
VCR/DVR	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
AUX	- - - - -
TV/CD	- - - - -
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/

CD, PORT

`HDMI1, HDMI2, HDMI3, HDMI4:

Select a corresponding HDMI input that the video component has been connected.

`- - - - -:

Select if you’re not using the HDMI OUT. Each HDMI input cannot be assigned to two input selectors or more. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selectors to “- - - - -”, or you will be unable to assign HDMI1 - HDMI4 to input selector.

Note

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automati- cally set to the same HDMI IN (➔ 34, Digital Audio (Digital Audio Input)).

•If you connect a component (such as UP-A1 Dock that seated iPod) to UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•Do not assign the component connected with the HDMI input to TV/CD selector when you set “TV Control” setting to “On” (➔ 41). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

En

Component (Component Video Input)

Menu Component

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign “IN2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -
TV/CD	- - - - -
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/

CD, PORT

`IN1, IN2:

Select a corresponding component video input that the video component has been connected.

`- - - - -:

Select if you’re not using the COMPONENT

VIDEO OUT.

Note

•If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

Digital Audio (Digital Audio Input)

Menu Digital Audio

If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign “OPT1” to the “TV/CD” input selector. Here are the default assignments.

Input selector	Default assignment
BD/DVD	COAX1
VCR/DVR	- - - - -
CBL/SAT	COAX2
GAME	OPT1
AUX	- - - - -
TV/CD	OPT2
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/

CD, PORT

`COAX1, COAX2, OPT1, OPT2:

Select a corresponding digital audio input that the component has been connected.

`- - - - -:

Select if the component is connected to an analog audio input.

34