Note

•The “Power Control” setting can be set only when the above “HDMI Control” setting is set to “On”.

•HDMI power control only works with p-compatible components that support it and may not work properly with some components due to their settings or compatibility.

•When set to “On”, power consumption will increase.

•When set to “On”, regardless of whether the AV receiver is On or in Standby, both audio and video stream from an HDMI input will be output to the TV or other components via HDMI connec- tion (HDMI pass through function). When the HDMI pass through function activates in standby mode, HDMI THRU indi- cator will light.

•The power consumption during standby mode will increase dur- ing the HDMI pass through function; however in the following cases, the power consumption can be saved:

1.The TV is in standby mode.

2.You are watching a TV program.

•Refer to the connected component’s instruction manual for details.

■TV Control

`Off:

TV Control disabled.

`On:

TV Control enabled.

Set to “On” when you want to control the AV receiver from an p-compatible TV that is connected to HDMI.

Note

•Do not assign the component connected with the HDMI input to the TV/CD selector when you set “TV Control” setting to “On”. Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.

•Set to “Off” when the TV is not compatible or when it is unclear whether the TV is compatible or not.

•The “TV Control” setting can be set only when the above

“HDMI Control” and “Power Control” settings are both set to “On”.

•Refer to the connected component’s instruction manual for details.

After changing the settings of the “HDMI Control”, “Audio Return Ch”, “Power Control”, or “TV Con- trol”, turn off the power to all connected pieces of equipment and then turn them on again. Refer to the User’s Manuals for all connected pieces of equipment.

Using the Audio Settings

You can change various audio settings by pressing

AUDIO.

Note

These settings are disabled when:

•a pair of headphones is connected, or

•the “Audio TV OUT” setting is set to “On” (➔ 40) and an input selector other than HDMI is selected.

 

 

1

Press RECEIVER followed by AUDIO.

2

Use q/wto select an item, and e/rto change the

 

setting.

Repeat this step for the other settings.

Tone Control Settings

You can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected.

■Bass

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output by the front speakers.

■Treble

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output by the front speakers.

Note

•To bypass the bass and treble tone circuits, select the Direct lis- tening mode.

•This procedure can also be performed on the AV receiver by using its TONE, –, and + buttons (➔ 43).

Speaker Levels

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to “Level Cal (Level Calibration)” (➔ 36) before setting the AV receiver to Standby.

■Subwoofer

`–15 dB to 0 dB to +12 dB in 1 dB steps

■Center

`–12 dB to 0 dB to +12 dB in 1 dB steps

Note

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ 35) cannot be adjusted.

En

41

Page 40 Page 42
Page 41
Image 41
Onkyo HT-S5300 instruction manual Using the Audio Settings, Tone Control Settings, Speaker Levels
Page 40 Page 42

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.
Top Page Image Contents