Onkyo HT-S5300 instruction manual Speaker Package, Subwoofer SKW-580

Speaker Package

Subwoofer (SKW-580)

For detailed information, see the pages in parentheses.

■Front

a

aSTANDBY/ON indicator

Red:	Subwoofer in standby mode
Blue:	Subwoofer on

■Rear

(North American models)

To AC outlet b c

(Asian models)

With the Auto Standby function, the SKW-580 auto- matically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-580 automatically enters Standby mode.

bOUTPUT LEVEL control (➔ 21, 22)

This control is used to adjust the volume of the sub- woofer.

cLINE INPUT (➔ 13)

This RCA input should be connected to the subwoofer pre out on the AV receiver with supplied RCA cable.

To AC outlet b c

Note

•The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on the AV receiver (➔ 36).

Front, Center, Surround and Surround Back Speakers (SKF-580, SKC-580, SKR-580, SKB-580)

SKF-580 SKR-580/SKB-580

	a	a
	b	b
Front	Front	Rear
	Rear

aKeyhole slots

These keyhole slots can be used to wall-mount the speaker. See “Wall Mounting” for mounting instruc- tions (➔ 14).

bSpeaker terminals

These push terminals are for connecting the speaker to the HT-R580 with the supplied speaker cables.

The supplied speaker cables are color-coded for easy identification. Simply connect each cable to the same- colored positive speaker terminal.

Caution

•The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will damage them.

SKC-580

a b

FrontRear

En

9