Onkyo HT-S5300 Contents, Using the Remote Controller, Installing the Batteries, Introduction

Batteries (AA/R6)

Using the Remote Controller

Installing the Batteries

Note

• If the remote controller

doesn’t work reliably, try replacing the batteries.

• Don’t mix new and old batteries or different

types of batteries.

• If you intend not to use the remote controller for

a long time, remove the batteries to prevent damage from leak- age or corrosion.

•Remove expired batteries as soon as possible to prevent damage from leakage or corrosion.

Aiming the Remote Controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

Contents
Introduction
Important Safety Instructions	2
Precautions	3
Speaker Precautions	4
Package Contents	4
Features	6
Front & Rear Panels	7
Speaker Package	9
Remote Controller	10
About Home Theater	11
Connections
Connecting the AV Receiver	12
Turning On & Basic Operations
Turning On/Off the AV Receiver	21
Basic Operations	22
Listening to the Radio	24
Recording	27
Using the Listening Modes	28
Advanced Operations
Advanced Setup	33
Zone 2	44
Controlling iPod & Other Components
Controlling iPod	47
Controlling Other Components	51
Others
Troubleshooting	54
Specifications	58
About HDMI	60
Using an RIHD-compatible TV, Player, or Recorder ...	61

To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press ON/STANDBY (➔ 54).

En

5