Connecting to the other components (continued)

Connecting the () controller

If you are using other ONKYO components

equipped with connectors, you can control these components using the amplifier's remote controller.

Before connecting

•The amplifier must be connected to the

system hookups for control operation.

•Each component has two connectors. There is no difference between these connectors.

•The components may be connected in any order.

•Remote control operation is not possible if

only the remote control cable is

connected to the connectors. Connect the audio connection cables correctly.

The illustration below is an hookup example. With these hookups, you can operate the CD Synchro Recording (see “CD/MD synchro recording” on page 9).

Tuner

Connecting the AC power cord (mains lead)

Insert the AC power cord into a wall outlet. The STANDBY indicator lights.

STANDBY/ON

STANDBY

•To use the unit with the other Onkyo Separate Collection series components, follow the connection diagram in the A-905TX/R-805TX instruction manual to connect the unit to the system.

•If you press the EJECT button while the unit is in STANDBY mode, the power will turn on and the display will light up automatically.

Amplifier

MD-105TXcable

CD player

Note

An remote control cable equipped with a 1/8 in. (3.5mm) diameter miniature two-conductor phone plug is included with this unit and with every tuner and cassette deck that bears the mark.

12