Editing the contents of an MD (continued)

 

MINIDISC RECORDER

AMCS

 

 

(PUSH TO ENTER)

 

 

 

 

AMCS

STANDBY / ON

CD

REC

 

 

DUBBING

 

STANDBY

REC MODE

DISPLAY EDIT/ NO YES

EDIT/NO

INPUT

 

 

MD-105TX

To erase all tracks of an MD

1Press the button.

2Press the EDIT/NO button and turn the AMCS knob to select “All Erase ?”

To cancel, press the EDIT/NO button or press the button.

3Press the AMCS knob. “All Erase??” is displayed for confirmation.

4Press the AMCS knob again.

When the erasing of all tracks on the MD is complete, “Complete” appears in the display.

Note

While the TOC indicator is lit or flashing, do not move or unplug the MD recorder.

Dividing a track

The following operation is possible when the playback is in progress or paused.

1 Pause a track at the desired dividing point.

2 Press the EDIT/NO button and turn the AMCS knob to select “Divide ?”

AMCS

(PUSH TO ENTER)

EDIT/NO

3 Press the AMCS knob.

The point at which the track is to be divided plays repeatedly, with “Rehearsal” and “Position OK?” alternately shown on the display.

AMCS

(PUSH TO ENTER)

4 Fine-adjust the dividing point.

To fine-adjust the dividing point...

Turn the AMCS knob while listening to the part that contains the dividing point. You can adjust the point in the range of –45 to +45 in steps described below. (The step varies depending on the selected recording mode.)

Adjustment step

SP: approx. 0.06 seconds

MONO and LP2: approx. 0.12 seconds

LP4: approx. 0.25 seconds

AMCS

(PUSH TO ENTER)

TRACK

TRACK

 

 

 

 

 

Dividing point

 

 

To stop dividing a track

 

 

 

 

 

 

 

 

 

 

 

 

Press the EDIT/NO button until “Divide?”

 

 

 

 

 

disappears, or press the

 

button.

 

 

 

 

36

 

 

 

Play