Troubleshooting

Symptom

Cause

Remedy

 

 

 

 

 

STANDBY/ON button is

•

Power cord plug is not properly

•

Insert the plug firmly.

pressed, but power does

 

connected to AC outlet.

 

 

not come on.

•

The R-805TX’s energy save

•

Press the R-805TX’s STANDBY/ON

 

 

 

function is enabled (when the R-

 

button. The power to the MD-

 

 

805TX is connected).

 

105TX will be turned on.

 

 

 

 

The unit does not operate

•

The disc may be damaged (“Disc

• Take the disc out and insert it again.

or operates poorly.

 

Error” appears).

 

If “Disk Error” remains, replace the

 

 

 

 

disc. (See “Precautions for handling

 

 

 

 

the MiniDisc (MD)” on page 48.)

The unit does not play.

•Moisture has formed inside the unit.

•Take the MD out and leave the unit in a warm place for several hours until the moisture evaporates (See page 47).

• The unit is not on.

•Press the STANDBY/ON button to turn the unit on.

•The disc is inserted in the wrong direction.

•Slide the MD into the disc compartment with the label side up and the arrow pointing toward the opening until the unit grips it. (See page 13.)

 

•

The disc may not be recorded (the

•

Replace the disc with one that has

 

 

track numbers do not appear).

 

been recorded.

 

 

 

 

 

The sound has a lot of

•

Strong magnetism from a

•

Move the unit away from the

static.

 

television or a similar device is

 

source of the magnetism.

 

 

interfering with operations.

 

 

 

 

 

 

 

The unit does not record.

•

The disc is record-protected

•

Close the record-protect tab. (See

 

 

(“Protected” appears).

 

page 34.)

 

•

The unit is not connected

•

Make connections properly to the

 

 

properly to the sound source.

 

sound source.

 

•

The recording level is too low.

• Adjust the recording level properly.

 

•

A premastered disc is inserted.

•

Replace it with a recordable disc.

 

•

There is not enough time left on

•

Replace it with another recordable

 

 

the disc.

 

disc with fewer recorded tracks.

 

•

The optical digital cable for audio

•

Connect the optical digital cable

 

 

use is not connected properly.

 

properly or use analog input.

 

 

(“D. In Unlock” appears.)

 

 

 

 

 

 

 

Noise is heard regularly

•

The indoor AM antenna is located

•

Distance the antenna from the

during AM recording.

 

near the recorder.

 

unit.

 

 

 

 

 

Too much noise is heard.

•

The unit is placed near a strong

•

Distance the unit from the

 

 

magnetic field, such as a TV.

 

magnetic field.

 

 

 

 

 

46