Signal Synchro recording

 

MINIDISC RECORDER

AMCS

 

 

(PUSH TO ENTER)

STANDBY / ON

CD

REC

 

 

DUBBING

 

STANDBY

 

DISPLAY EDIT/ NO

YES

INPUT

REC MODE

 

 

MD-105TX

INPUT

REC

Even if your recording source is not Onkyo -compatible, you can perform synchronized recording. You can also make signal synchro recording from a connected CDR-205TX.

1 Press the INPUT button repeatedly until “Digital In 1,” “Digital In 2,” or “Analog In” appears.

•You can perform signal synchro recording with both digital and analog recording sources.

INPUT

(“Digital In 1” is selected.)

2 Select a recording mode.

Refer to Step 4 on page 22.

3 Press the REC button.

When the time indicator lights up on the display, press the REC button again. “Signal Rec” appears.

REC

The recorder now waits for the input signal, and displays the “Signal Wait” message and the time indicator alternately.

Note

If no signal is input for approx .30 seconds, the MD recorder will enter recording standby mode.

4 Recording starts.

Recording starts as soon as the unit receives signals from the recording source while “Signal Wait” is displayed.

(Recording source)

30