Remote Controller—Continued

Subwoofer (SKW-960)

■ Front

 

For further information, see the pages in parentheses.

 

 

A Standby/On indicator

 

 

Red:

Subwoofer in standby mode

 

 

Blue:

Subwoofer on

With the Auto Standby function, the SKW-960 automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-960 automatically enters Standby mode.

 

 

 

 

 

 

B OUTPUT LEVEL control (50)

 

 

 

 

 

 

Adjusts the volume of the subwoofer.

 

 

 

 

 

 

C LINE INPUT (21)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connects to the AV receiver’s SUBWOOFER PRE

1

 

 

OUT jack with the supplied RCA cable.

■Rear

Note:

• The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try increasing or decreasing the subwoofer output level slightly on the AV receiver (see page 79).

• The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will dam- age them.

2 3

To wall outlet

15

Page 14 Page 16
Page 15
Image 15
Onkyo SKB-960, SKF-960F, SKC-960C Remote Controller, Subwoofer SKW-960, Front, Standby/On indicator, Output Level control
Page 14 Page 16
Top Page Image Contents