Equalizer Settings, Buttons to select | Onkyo SKW-960, SKF-960F

Equalizer Settings

These settings are set automatically by the Automatic Speaker Setup function (see page 42).

Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 83.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [ ]/[ ]
	buttons to select “2. Speaker

Setup,” and then press [ENTER].

3 Use the Up and Down []/[ ] buttons to select “4. Equalizer Settings,” and then press [ENTER].

Use the Up and Down []/[ ] buttons to select a frequency. Use the Left and Right []/[ ] buttons to adjust the level at that frequency.

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

Tip: Low frequencies (e.g., 63 Hz) affect bass sounds; high frequencies (e.g., 16000 Hz) affect treble sounds.

Use the Up [] button to select “Channel,” and then use the Left and Right []/[ ] buttons to select another speaker.

Repeat steps 5 and 6 for each speaker. Speakers that you’ve set to No in the “Speaker Conﬁguration” on page 81 cannot be selected.

4	Use the Left and Right [ ]/[ ]
	buttons to select:

Off: Tone off, response ﬂat. Audyssey®: The tone for each speaker

is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup.

Manual: You can adjust the equal- izer for each speaker manually.

If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 8.

Notes:

•The front, center, surround, and surround back speak- ers can be adjusted at 63 Hz, 250 Hz, 1000 Hz,

4000 Hz, and 16000 Hz. The subwoofer can be adjusted at 25 Hz, 40 Hz, 63 Hz, 100 Hz, and 160 Hz.

•While the Direct listening mode is selected, the equal- izer settings have no effect.

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.