Onkyo HT-R960 Adjusting the Listening Modes, Using the Audio Adjust Settings, PLIIx/Neo6 Settings

Adjusting the Listening Modes

Using the Audio Adjust Settings

These settings apply to only speaker set A.

1

2, 3 2–4

1, 5

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.
2	Use the Up and Down [ ]/[ ]
	buttons to select “3. Audio
	Adjust,” and then press [ENTER].

3	Use the Up and Down [ ]/[ ]
	buttons to select an item, and
	then press [ENTER].

3.Audio Adjust

1.Multiplex/Mono

2. PLII x/Neo:6

3.Dolby EX

4.Theater-Dimensional

5.LFE Level

4	Use the Up and Down [	]/[	]
	buttons to select an option, and
	use the Left and Right [	]/[	]
	buttons to change it.

The Audio Adjust menu items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

The Audio Adjust settings are explained below.

Multiplex/Mono Settings

Multiplex

■Input Ch

This setting determines which channel of a stereo multi- plex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are out- put.

Mono

■Input Ch

This setting determines which channel is output when the Mono listening mode is used with a stereo source.

Left+Right: Both the left and right channels are output (default).

Left: Only the left channel is output. Right: Only the right channel is output.

■Output Speaker

This setting determines which speakers output mono audio when the Mono listening mode is selected.

Center: Mono audio is output by the center speaker (default).

Left/Right: Mono audio is output by the front left and right speakers.

PLIIx/Neo:6 Settings

PLIIx Music (2 ch Input)

These settings apply to only 2-channel stereo sources.

If you’re not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx.

■Panorama

With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music listening mode.

On: Panorama function on.

Off: Panorama function off (default).

76