Onkyo SKC-960C, SKW-960, SKF-960F, SKB-960, HT-R960, SKM-960S instruction manual Listening Mode Presets

Adjusting the Listening Modes—Continued

Listening Mode Presets

On the Listening Mode Preset menu, you can specify a default listening mode for each of the audio formats sup- ported by each input selector. The AV receiver will then select the listening mode automatically depending on the format of the input signal. You can still select the other listening modes, although the default listening mode will be used the next time you turn on the AV receiver.

1

2, 3 2–4

1, 5

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [ ]/[ ]
	buttons to select “5. Listening
	Mode Preset,” and then press
	[ENTER].

3	Use the Up and Down [ ]/[ ]
	buttons to select an input selec-
	tor, and then press [ENTER].
	The audio formats supported by that
	input selector appear.
	For the TUNER input selector, Analog
	is the only format available.

4	Use the Up and Down [ ]/[ ]
	buttons to select an audio for-
	mat, and use the Left and Right
	[ ]/[ ] buttons to select a lis-
	tening mode.
	Only listening modes compatible with
	the audio format can be selected (see
	pages 60–71).
	Analog/PCM: Specifies the default lis-
	tening mode for analog and PCM
	sources.
	Dolby Digital: Specifies the default lis-
	tening mode for Dolby Digital sources.
	DTS: Specifies the default listening
	mode for DTS sources.
	D.F. 2ch: Specifies the default listening
	mode for 2-channel (2/0) stereo sources
	in a digital format, such as Dolby Digi-
	tal or DTS.
	D.F. Mono: Specifies the default listen-
	ing mode for mono sources in a digital
	format, such as Dolby Digital or DTS.
	Multich PCM: Specifies the default
	listening mode for multichannel PCM
	sources, such as DVD-Audio (input via
	HDMI).
	192k/176.4k: Specifies the default lis-
	tening mode for high resolution

192kHz and 176.4 kHz digital sources, such as DVD-Audio.

Dolby TrueHD: Specifies the default listening mode for Dolby TrueHD sources, such as Blu-ray or HD DVD (input via HDMI).

DTS-HD Master Audio: Specifies the default listening mode for DTS-HD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI).

DSD: Specifies the default listening mode for DSD multichannel sources, such as SACD.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

Note:

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

80