Onkyo SKB-960, SKW-960, SKF-960F, SKC-960C, HT-R960 Miscellaneous Setup, Volume Setup, OSD Setup

Advanced Setup—Continued

Miscellaneous Setup

This section explains items on the Miscellaneous menu.

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [ ]/[ ]
	buttons to select
	“6. Miscellaneous,” and then
	press [ENTER].

3	Use the Up and Down [ ]/[ ]
	buttons to select an item, and
	then press [ENTER].

4	Use the Up and Down [	]/[	]
	buttons to select an item, and
	use the Left and Right [	]/[	]
	buttons to change it.

The items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Volume Setup

■Volume Display

With this setting, you can choose how the volume level is displayed.

Absolute: Display range is Min, 1 through 99, Max. Relative: Display range is –∞dB, –81 dB, –80 dB

through +18 dB (default).

The absolute value 82 is equivalent to the relative value 0 dB.

■Muting Level

This setting determines how much the output is muted when the Muting function is used (see page 51). It can be set to –∞dB (fully muted) or from –50 dB to –10 dB in 10 dB steps (0 dB: default).

■Maximum Volume

With this setting, you can limit the maximum volume.

When the Volume Display setting is set to Absolute, the Maximum Volume range is Off, 99 to 50. When it’s set to Relative, the range is Off, +17 dB to –32 dB. To dis- able this setting, select Off.

■Power On Volume

This setting determines what the volume will be each time the AV receiver is turned on.

When the Volume Display preference is set to Absolute, the range is Last, Min, 1 to Max. When it’s set to Rela- tive, the range is Last, –∞dB, –81 dB to +18 dB.

To use the same volume level as when the AV receiver was last turned off, select Last.

Note:

•The Power On Volume setting cannot be set higher than the Maximum Volume setting.

■Headphone Level

With this setting, you can offset the headphone volume relative to the main volume. This is useful if your head- phones are too loud or too quiet at the volume setting you usually use when listening through your speakers. The headphone level can be set from –12 dB to +12 dB.

OSD Setup

■Immediate Display

This setting determines whether operation details are displayed onscreen immediately after an AV receiver function is used.

On: Displayed (default).

Off: Not displayed.

Even if On is selected, operation details are not output if the input source is connected to an HDMI IN and output by the HDMI OUT.

For optimal video performance, THX recommends that Immediate Display be turned off.

87