First Time
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD player to COMPONENT IN 3, you should assign it to the DVD input selector.
If you want to output composite and
Input selector | VIDEO IN jack |
|
|
DVD | IN 1 |
|
|
VIDEO 1 | IN 2 |
|
|
VIDEO 2 | IN 3 |
|
|
VIDEO 3 | VIDEO |
|
|
VIDEO 4 | VIDEO |
|
|
|
|
1Press the [RECEIVER] button fol-
RECEIVER | lowed by the [SETUP] button. |
The main menu appears onscreen.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “0. Initial |
ENTER | Setup,” and then press [ENTER]. |
| The Initial Setup menu appears. |
| ENTER |
3 | Use the Up and Down [ ]/[ ] |
| buttons to select an input selec- |
| tor, and then use the Left and |
| ENTER |
| Right [ ]/[ ] buttons to select: |
IN1: Use the video component connected to COMPO-
NENT VIDEO IN 1. IN2: Use the video component
connected to COMPO-
NENT VIDEO IN 2. IN3: Use the video component
connected to COMPO-
NENT VIDEO IN 3.
VIDEO: Output composite video and
4Press the [SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
43