![IntelliVolume](/images/new-backgrounds/21762/21762141x1.webp)
Advanced
IntelliVolume
You can set the input level for each input source. This is useful if some of your AV components are louder or qui- eter than others.
While this menu is shown onscreen, you can select each input source and set the levels while listening to and comparing them.
1Press the [RECEIVER] button fol-
RECEIVER | lowed by the [SETUP] button. |
|
The main menu appears onscreen.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “7. Input |
ENTER | Setup,” and then press [ENTER]. |
| The Input Setup menu appears. |
ENTER |
|
3Use the INPUT SELECTOR but-
tons on the remote controller to select the input source that you want to set.
4 | Use the Up and Down [ ]/[ ] |
| buttons to select |
ENTER | “a. IntelliVolume.” |
| If a component is too loud compared to |
| your other components, use the Left |
| [ ] button to adjust the level. If it’s too |
| quiet, use the Right [ ] button. |
•The level can be set from
Setting Preferences
This section explains the items on the Preference menu.
1Press the [RECEIVER] button fol-
RECEIVER | lowed by the [SETUP] button. |
|
The main menu appears onscreen.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “8. Preference,” |
ENTER | and then press [ENTER]. |
| The Preference menu appears. |
ENTER |
|
3 | Use the Up and Down [ ]/[ | ] |
| buttons to select the settings, | |
ENTER | and use the Left and Right [ | ]/ |
| [ ] buttons to set them. |
|
The settings are explained on page 72.
4When you’ve finished, press the
[SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
71