First Time
*
(Menus vary depending on country)
*When a speaker has a warning, its abbrevia- tion (e.g., L, R, and so on) appears.
Not Detect:
No speaker was detected. Make sure the connection is secured correctly.
Distance Error:
The positions of the speakers are too close or too far, or the distance could not be measured.
If you want to adjust any of the settings manually, see “Speaker Setup” on page 44.
When you’ve checked the set- tings, press the [RETURN] button to return to the previous menu.
Note:
Measurement may not be performed correctly depend- ing on your use environment. If the measurement results remain unchanged after retried, create speaker settings manually (see pages
Tip:
When any
results confirmation screen, turn the volume up to an appropriate level and the frequency as high as it can go. And then turn on the Direct switch, if available. For fur- ther information, see the manual for the subwoofer.
40