Manuals / Onkyo / Home Audio / Stereo Receiver

Onkyo TX-SR603X Speciﬁcations, Ampliﬁer Section, Video Section, Tuner Section, General, Impedance

Models: TX-SR603X

1 103

Download 103 pages 13.42 Kb

Page 83

Speciﬁcations

Speciﬁcations

Ampliﬁer Section

Power Output	90 W + 90 W
2 channel driven:	90 W + 90 W
	(8 Ω, 20 Hz–20 kHz, FTC)
Dynamic Power	225 W + 225 W (3 Ω, Front)
	175 W + 175 W (4 Ω, Front)
	105 W + 105 W (8 Ω, Front)
THD (Total Harmonic
Distortion)	0.08 % (Power Rated)
Damping Factor	60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and	200 mV/47 kΩ (LINE)
Impedance	200 mV/47 kΩ (LINE)
Output Level and	200 mV/470 Ω (REC OUT)
Impedance	200 mV/470 Ω (REC OUT)
Frequency Response	10 Hz–100 kHz/+1 dB-3 dB (Direct
	mode)
Tone Control	±10 dB, 50 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
SN Ratio	106 dB (LINEIHF-A)
Speaker Impedance	6Ω–

Video Section

Input Sensitivity/Output

Level and Impedance 1 Vp-p/75 Ω (Component and S-Video Y)

0.7Vp-p/75 Ω (Component Pb/Cb, Pr/Cr)

0.28Vp-p/75 Ω (S-Video C) 1 Vp-p/75 Ω (Composite)

Component Video
Frequency Response	5 Hz – 50 MHz
Tuner Section

■ FM
Tuning Frequency Range	87.5 MHz– 107.9 MHz
Usable Sensitivity	Stereo: 22.2 dBf (75 Ω IHF)
	Mono: 11.2 dBf (75 Ω IHF)
S/N Ratio	Stereo: 67 dB (IHF-A)
	Mono: 73 dB (IHF-A)
THD	Stereo: 0.5 % (1 kHz)
	Mono: 0.3 % (1 kHz)
Frequency Response	30 Hz–15 kHz / ±1 dB
Stereo Separation	40 dB (1kHz)
■ AM
Tuning Frequency Range	530 kHz–1710 kHz
Usable Sensitivity	300 µV
S/N Ratio	40 dB
THD	0.70%

General

Power Supply	AC 120 V, 60 Hz
Power Consumption	7A
Stand-by Power
Consumption	0.1 W
Dimensions (W x H x D) 435 W x 174 H x 377 D mm
	17-1/8" W x 6-7/8" H x 14-13/16" D
Weight	11.0 kg
	24.3 lbs

■ Video Inputs

Component Video Input 1,2,3

S-Video Compatible Jack
Input	DVD, VIDEO1, VIDEO2, VIDEO3,
	VIDEO4
A/V Input	DVD, VIDEO1, VIDEO2, VIDEO3,
	VIDEO4

■ Video Outputs

Component Video
Output	OUT
S-Video Compatible Jack
Output	MONITOR OUT, VIDEO1, VIDEO2
A/V Output	MONITOR OUT, VIDEO1, VIDEO2

■Audio Inputs

Digital Inputs	Optical: 4
	Coaxial: 2
Analog Inputs	DVD(MULTICHANNEL), VIDEO1,
	VIDEO2, VIDEO3, VIDEO4, TAPE, CD
Multichannel Inputs	6

■Audio Outputs

Digital Outputs	Optical: 1
Analog Outputs	TAPE, VIDEO1, VIDEO2, ZONE2
Subwoofer Pre Outputs	1
Speaker Outputs	9
Phones	1

■Other Jacks

IR Input	1
12V Trigger Out	1

Speciﬁcations and features are subject to change without notice.

83

Image 83

Onkyo TX-SR603X Speciﬁcations, Ampliﬁer Section, Video Section, Tuner Section, General, Power Output, 90 W + 90 W, mode

Contents

Instruction Manual Controlling Other ComponentsContents TX-SR603XAVIS Important Safety InstructionsModèle pour les Canadien PrecautionsFor U.S. Models For Canadian modelFor European Models Supplied AccessoriesPrecautions—Continued For British modelsFM/AM/XM Tuner FeaturesAmpliﬁer Audio/VideoFirst Time Setup Table of ContentsBasic Connecting the AV ReceiverControlling Other Components Table of Contents—ContinuedAdvanced Advanced SetupI J K L M Front & Rear PanelsFront Panel 1 234 5 6 7 8 9 0A B CDE FG HVSETUP MIC Front & Rear Panels—ContinuedQSETUP button RMASTER VOLUME control3Listening mode & format indicators Display1MUTING indicator 2ZONE 2 indicatorM N O P Q R Rear PanelFront & Rear Panels—Continued 1B CD 5 6 G H 9 J KFront & Rear Panels—Continued MREMOTE CONTROLNotes Remote ControllerInstalling the Batteries Using the Remote ControllerRECEIVER/TAPE Mode Remote Controller—ContinuedAbout the Remote Controller Modes ASTANDBY button Remote Controller—ContinuedRemote Controller—Continued DVD ModeRemote Controller—Continued CD, MD & CDR ModesRemote Controller—Continued HDD ModeCenter speaker About Home TheaterEnjoying Home Theater Front left and right speakersAV Connection Color Coding Connecting the AV ReceiverAbout AV Connections Optical Digital JacksConnecting a Powered Subwoofer Connecting the AV Receiver—ContinuedConnecting Your Speakers Using Dipole Speakerswires tightly, as shown Speaker Connection PrecautionsConnecting the Speaker Cables Connecting the AV Receiver—ContinuedConnecting the AV Receiver—Continued Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Connecting the AV Receiver—ContinuedAudio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsConnecting the AV Receiver—Continued Connecting Your TV or ProjectorMonitor Out Audio ConnectionsAudio Connections Connecting a DVD PlayerVideo Connections Connecting the AV Receiver—ContinuedDVD player Connecting the AV Receiver—ContinuedUsing a Multichannel Connection Video Connections Connecting a VCR for PlaybackConnecting an HDD/DVD recorder for Playback Connecting the AV Receiver—ContinuedVideo Connections Connecting a VCR for RecordingPlayback from the Recording VCR Connecting the AV Receiver—ContinuedUsing Component Video Connecting the AV Receiver—ContinuedUsing Composite Video Using S-VideoAudio Connections Connecting a Camcorder, Game Console, etcConnecting the AV Receiver—Continued Video ConnectionsRecorder Connecting a CD PlayerConnecting a Cassette Recorder Connecting a DAT, CD, or MDDigital Recording Connecting the AV Receiver—Continuedble or phono preamp Connecting a TurntableConnecting the AV Receiver—Continued turntable, as shownNotes Connecting ComponentsConnecting the Power Cord of Another Component Connecting the AV Receiver—ContinuedNotes Turning On the AV ReceiverConnecting the AV Receiver—Continued 1Plug the power cord into an AC wall outletrectly. Setup the room as you would First Time SetupAutomatic Speaker Setup automatic setup will not work corCheck the Results First Time Setup—ContinuedCancel Apply the ResultsNot Detect First Time Setup—ContinuedDistance Error Submenus Main menu About the Onscreen Setup MenusFirst Time Setup—Continued Digital inputs cannot be assigned to Initial SetupDigital Input First Time Setup—ContinuedThe Initial Setup menu appears Component Video SetupFirst Time Setup—Continued to No, this setting is ﬁxed at Large Speaker Setup2–10 First Time Setup—ContinuedNotes CrossoverFirst Time Setup—Continued The setup menu closes Double BassFirst Time Setup—Continued Press the SETUP buttonNotes Speaker DistanceFirst Time Setup—Continued 5Press the SETUP button Speaker Level CalibrationFirst Time Setup—Continued lowed by the SETUP buttonThe Equalizer Settings menu appears Equalizer SettingFirst Time Setup—Continued First Time Setup—Continued Changing the Input DisplaySelecting the Input Source Basic OperationsBasic Operations—Continued Setting the Display BrightnessUsing the Sleep Timer Using HeadphonesInterpreting Surround Channel Values Displaying Source InformationBasic Operations—Continued Displaying Radio Information Using the TunerTuning into Radio Stations Listening to the RadioBasic Operations—Continued Connecting the XM AntennaListening to XM Satellite Radio Signing Up for XM Satellite RadioChannels cannot be selected while the Selecting XM Radio Channelsindicator is Basic Operations—ContinuedBasic Operations—Continued Displaying XM Radio InformationSong title Listening mode Remote controllerThe XM Setup menu appears XM Radio MessagesPositioning the XM Antenna The following messages may appear while using XMBasic Operations—Continued Presetting AM/FM Stations & XM ChannelsSelecting Presets Deleting PresetsThis button selects the Stereo listening mode Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverMultich Basic Operations—ContinuedBasic Operations—Continued About the Listening ModesBasic Operations—Continued Onkyo Original DSP ModesNotes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER Advanced OperationsInput Using the DVD Analog MultichannelAdjusting Individual Speaker Levels Advanced Operations—ContinuedNotes Adjusting Individual Speaker LevelsRecording Advanced Operations—Continuedthe fact that when an audio-onlyinput source i.e AV RecordingRecording Separate AV Sources information on connecting componentsThe Audio Adjust menu appears Advanced SetupAdjusting the Bass & Treble Audio Adjust FunctionsNeo:6 Music Mode Setting Advanced Setup—ContinuedInput Channel Settings PL IIx Music Mode SettingsThe Input Setup menu appears Assigning Listening Modes to Input SourcesAdvanced Setup—Continued The Input Setup menu appears IntelliVolumeSetting Preferences Advanced Setup—ContinuedInterlaced:Default Digital Input Signal FormatsAdvanced Setup—Continued Notes Changing the Remote Controller’s IDAdvanced Setup—Continued Zone Connecting ZoneUsing a Receiver/Integrated Amp in Zone Using Only Speakers in ZoneZone 2—Continued Setting the Powered ZoneNotes Using ZoneZone 2—Continued Using a Multiroom Kit with Zone Using the Remote Control in ZoneUsing the 12V Trigger Using a Multiroom Kit with a CabinetNotes Entering Remote Control CodesControlling Other Components Controlling Other Components—Continued Resetting the Remote ControllerResetting the REMOTE MODE Buttons Page 1While holding down the REMOTE Learning Commands from Other Remote ControllersMODE button for the mode in Controlling Other Components—ContinuedDeleting Macros Using MacrosMaking Macros Running MacrosTuner Section SpeciﬁcationsAmpliﬁer Section Video SectionAudio TroubleshootingPower Video Troubleshooting—ContinuedZone Remote ControllerTuner RecordingThe speaker volume cannot be set as required? OthersTroubleshooting—Continued The sound changes when I connect my head- phones?ONKYO EUROPE UK Office 2 9 3 4 4 0 9ONKYO U.S.A. CORPORATION ONKYO EUROPE ELECTRONICS GmbHPage Page Page Page Page Page Page Page Page Page Page Page Page