![Advanced Setup—Continued](/images/new-backgrounds/21762/21762137x1.webp)
Advanced Setup—Continued
The Audio Adjust functions are explained below.
Input Channel Settings
■Multiplex
This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.
Main: The main channel is output (default). Sub: The sub channel is output.
Main/Sub: Both the main and sub channels are output.
■Mono (2chSource)
This setting specifies the channel to be used for playing any
L+R: Both the left and right channels are output (default).
L:Only the left channel is output.
R:Only the right channel is output.
PL IIx Music Mode Settings
These settings provide for playing any
■Panorama
With this function, you can broaden the width of the front stereo image when using the Pro Logic II Music or Pro Logic IIx Music listening mode.
On: Panorama function on.
Off: Panorama function off (default).
■Dimension
With this setting, you can move the sound field forward or backward when using the Pro Logic II Music or Pro Logic IIx Music listening mode. The default setting is 3. Higher settings move the sound field forward. Lower set- tings move it backward.
If the stereo image feels too wide, or there is too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it is in mono, or there is not enough surround sound, move it backward.
■Center Width
With this function, you can adjust the width of the sound from the center speaker when using the Pro Logic II Music or Pro Logic IIx Music listening mode. Normally if you are using a center speaker, the center channel sound is output by only the center speaker. (If you are not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. It can be adjusted from 0 to 7 (default is 3).
Neo:6 Music Mode Setting
■Center Image
The DTS Neo:6 Music listening mode creates
When set to 0, the front left and right channel output is attenuated by half
Dolby Digital EX Input Signal Setting
■Dolby D EX
This setting determines how Dolby Digital EX signals are handled. This setting is unavailable if no surround back speakers are connected.
Auto: If the source signal contains a Dolby Digital EX flag, the Dolby Digital EX listening mode is used (default).
Manual: You can select Pro Logic IIx Movie, Pro Logic IIx Music, Dolby Digital, or Dolby Digital EX.
69