First Time
TV Format Setup
(not North American models)
You must specify the TV system used in your area.
1 | RECEIVER | Press the [RECEIVER] button, | ||||
followed by the [SETUP] button. | ||||||
|
| |||||
|
| The main menu appears onscreen. |
| |||
SETUP |
|
|
|
| ||
2 |
| Use the Up and Down [ | ]/[ | ] | ||
|
| buttons to select “8. Hardware | ||||
|
| Setup,” and then press [ENTER]. | ||||
|
| The Hardware Setup menu appears. | ||||
|
| 8.Hardware Setup |
|
|
| |
|
|
|
| |||
|
| a.SP Impedance :6ohms |
|
| ||
|
| b.PoweredZone2:NotAct |
|
| ||
|
| c.TV Format | :Auto |
|
| |
|
| d.AM Freq. Step: 9kHz |
|
| ||
|
| e.Remote ID | :1 |
|
| |
|
| f.HDMI Audio Out :Off |
|
| ||
|
| g.SW Input Sensitivity |
|
| ||
|
|
| : 0dB |
|
| |
3 |
| Use the Up and Down [ | ]/[ | ] |
buttons to select “TV Format,” and then use the Left and Right []/[ ] buttons to select:
Auto: Select this to automatically detect the TV system from the video input signals.
NTSC: Select if the TV system in your area is NTSC.
PAL: Select if the TV system in your area is PAL.
4 | Press the [SETUP] button. |
| |
| Setup closes. |
SETUP |
|
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
AM Frequency Step Setup (on some models)
You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.
1 | RECEIVER | Press the [RECEIVER] button, | ||||
followed by the [SETUP] button. | ||||||
|
| |||||
|
| The main menu appears onscreen. |
| |||
SETUP |
|
|
|
| ||
2 |
| Use the Up and Down [ | ]/[ | ] | ||
|
| buttons to select “8. Hardware | ||||
|
| Setup,” and then press [ENTER]. | ||||
|
| The Hardware Setup menu appears. | ||||
|
| 8.Hardware Setup |
|
|
| |
|
|
|
| |||
|
| a.SP Impedance :6ohms |
|
| ||
|
| b.PoweredZone2:NotAct |
|
| ||
|
| c.TV Format | :Auto |
|
| |
|
| d.AM Freq. Step: 9kHz |
|
| ||
|
| e.Remote ID | :1 |
|
| |
|
| f.HDMI Audio Out :Off |
|
| ||
|
| g.SW Input Sensitivity |
|
| ||
|
|
| : 0dB |
|
| |
3 |
| Use the Up and Down [ | ]/[ | ] |
buttons to select “AM Freq. Step,” and then use the Left and Right []/[ ] buttons to select:
10 kHz: Select if 10 kHz steps are used in your area.
9 kHz: Select if 9 kHz steps are used in your area.
4 | Press the [SETUP] button. |
| |
| Setup closes. |
SETUP |
|
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
48