Advanced Setup
Speaker Setup |
| 2 | |
Some of the settings in this section are set automatically |
|
| |
by the Automatic Speaker Setup function (see page 38). |
|
| |
Here you can check the settings made by the Automatic |
|
| |
Speaker Setup function, or set them manually, which is |
|
| |
useful if you change one of the connected speakers after |
|
| |
using the Automatic Speaker Setup function. |
|
| |
Speaker Configuration |
|
| |
|
|
| |
This setting is set automatically by the Automatic |
|
| |
Speaker Setup function (see page 38). |
|
| |
With these settings, you can specify which speakers are |
| 3 | |
connected and a crossover frequency for each speaker. |
| ||
The following crossover frequencies can be specified: |
|
| |
Full Band, 40 Hz, 50 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz, |
|
| |
150 Hz, 200 Hz. |
|
| |
Specify Full Band for speakers that can output |
|
| |
quency bass sounds adequately, for example, speakers |
|
| |
with a good sized woofer. For smaller speakers, specify |
|
| |
a crossover frequency. Sounds below the crossover fre- |
|
| |
quency will be output by the subwoofer instead of the |
|
| |
4 | |||
speaker. Refer to your speakers’ manuals to determine | |||
the optimum crossover frequencies. |
|
| |
Use the Up and Down [
]/[ ] buttons to select “1. Speaker Config,” and then press [ENTER].
The Speaker Config menu appears.
1.Speaker Config
a.Subwoofer |
| :Yes |
b.Front | : | 100Hz |
c.Center | : | 100Hz |
d.Surround | : | 100Hz |
e.SurrBack | : | 100Hz |
f.SurrBack | Ch | :2ch |
g.LPFofLFE : | 120Hz | |
h.DoubleBass | ||
Use the Up and Down [
]/[ ] buttons to select “a. Subwoofer,” and then use the Left and Right [
]/[
] buttons to select:
Yes: Select if a subwoofer is con- nected.
No: Select if no subwoofer is con- nected.
Use the Up and Down [
]/[ ] buttons to select “b. Front,” and then use the Left and Right [
]/ [
] buttons to select a crossover frequency.
Note:
1
2
ON/STANDBY | REMOTE MODE |
ZONE2 |
|
| RECEIVER | DVD |
|
| TAPE |
|
INPUT SELECTOR | M D/CDR | ||
1 | 2 | 3 | CD |
|
|
| HDD |
V1 | V2 | V3 |
|
4 | 5 | 6 | T V |
V4 | MULTI CH | DVD |
|
7 | 8 | 9 | VCR |
TAPE | TUNER | CD | CABLE |
10 | 11 | 12 | |
+10 | 0 | CLR | SAT |
D TUN | ENT |
|
|
DIMMER | SLEEP |
| |
TV | VOL | CH | VOL |
DISC | |||
|
| ALBUM |
|
INPUT |
|
|
|
GUIDE |
|
| PREVIOUS |
TOP MENU |
|
| MENU |
MUTING
ENTER
PLAYLIST/CATPLAYLIST/CAT
RETURN | SETUP |
5
2-10 1, 11
If the Subwoofer setting in step 3 is set to No, this setting is fixed at Full Band.
Use the Up and Down [
]/[ ] buttons to select “c. Center,” and then use the Left and Right [
]/ [
] buttons to select a crossover frequency.
If no center speaker is connected, select None.
Note:
If the Front setting in step 4 is set to anything other than Full Band, Full Band cannot be selected here.
1 | Press the [RECEIVER] button fol- |
| |
RECEIVER | lowed by the [SETUP] button. |
| |
| The main menu appears onscreen. |
SETUP |
|
67
