Advanced Setup—Continued
6
7
8
Use the Up and Down [
]/[ ] buttons to select “d. Surround,” and then use the Left and Right [
]/[
] buttons to select a crossover frequency.
If no surround left and right speakers are connected, select None.
Note:
If the Front setting in step 4 is set to anything other than Full Band, Full Band cannot be selected here.
Use the Up and Down [
]/[ ] buttons to select “e. SurrBack,” and then use the Left and Right [
]/[
] buttons to select a crossover frequency.
If no surround back speakers are con- nected, select None.
Notes:
•If the Surround setting in step 6 is set to None, this setting cannot be selected.
•If the Surround setting in step 6 is set to anything other than Full Band, Full Band cannot be selected here.
Use the Up and Down [
]/[ ] buttons to select “f. SurrBack Ch,” and then use the Left and Right [
]/[
] buttons to select:
1ch: Select if one surround back
speaker is connected.
2ch: Select if two (left and right) surround back speakers are connected.
Note:
If the Surround Back Setting in step 7 is set to None, this setting cannot be selected.
Continue with step 9 in the right col- umn.
Low-Pass Filter for the LFE Channel
This setting is not set automatically by the Automatic Speaker Setup function (see page 38).
With this setting, you can specify the cutoff frequency of the LFE channel’s
9 Use the Up and Down [
]/[ ] 
buttons to select “g. LPFofLFE,” and then use the Left and Right 
[
]/[
] buttons to select a low- 
pass filter frequency.
The following
Double Bass
This setting is not set automatically by the Automatic Speaker Setup function (see page 38).
With the Double Bass function, you can boost bass out- put by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting in step 3 is set to Yes, and the Front setting in step 4 is set to Full Band.
In the speaker setup screen, you can choose how bass information is distributed to your speakers only if you have large front left and right speakers AND a subwoofer.
10 Use the Up and Down [
]/[ ] buttons to select “h. Double Bass,” and then use the Left and 
Right [
]/[
] buttons to select:
On: Double Bass function on (default). Front left and right bass also goes to the sub- woofer simultaneously.
Off: Double Bass function off.
11 | Press the [SETUP] button. |
| |
| The setup menu closes. |
SETUP |
|
Note:
This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
68
