Onkyo TX-SR674/674E Equalizer Setting, Buttons to select 4. Equalizer, Settings, and then press

Advanced Setup—Continued

Equalizer Setting

This setting is set automatically by the Automatic Speaker Setup function (see page 38).

Here you can adjust the EQ of individual speakers. To set the volume of individual speakers see page 70.

ON/STANDBY	REMOTE MODE
	ZONE2

1			RECEIVER	DVD
			TAPE
	INPUT SELECTOR			M D/CDR
	1	2	3	CD
				HDD
	V1	V2	V3
	4	5	6	T V
	V4 MULTI CH		DVD
	7	8	9	VCR
	TAPE	TUNER	CD	CABLE
	10	11	12
	+10	0	CLR	SAT
	D TUN	ENT
	--/---	DIMMER	SLEEP
	TV	VOL	CH	VOL
			DISC
			ALBUM
	INPUT
2	GUIDE			PREVIOUS
	TOP MENU			MENU
				MUTING
		ENTER		2-6
	PLAYLIST/CAT		PLAYLIST/CAT

RETURN SETUP 1, 7

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.
	The main menu appears onscreen.
SETUP
2	Use the Up and Down [ ]/[ ]
	buttons to select “4. Equalizer
	Settings,” and then press
	[ENTER].
	The Equalizer Settings menu appears.

3	Use the Left and Right [ ]/[ ]
	buttons to select:

Off: Tone off, response flat. Audyssey: The tone for each speaker

is set automatically by the Automatic Speaker Setup function.

		Be sure to select this set-
		ting after having per-
		formed the Automatic
		Speaker Setup.
	Manual: You can adjust the EQ of
		each speaker manually.
	If you select Manual, continue with this
	procedure. If you select Off or
	Audyssey, go to step 7.
4	Use the Down [			] button to
	select “Channel,” and then use
	the Left and Right [				]/[	] but-
	tons to select a speaker.
	4.Equalizer Settings
	------------------------
	a.Equalizer : Manual
	------------------------
	b.Channel :			Front
	------------------------
	c.	80Hz		:	0dB
	d.	250Hz		:	0dB
	e.	800Hz		:	0dB
	f. 2500Hz			:	0dB
	g. 8000Hz			:	0dB
5	Use the Up and Down [					]/[ ]
	buttons to select a frequency,
	and then use the Left and Right
	[ ]/[	] buttons to adjust the
	level at that frequency.
	The volume at each frequency can be
	adjusted from –6 to +6 dB in 1 dB
	steps.
	Tip: Low frequencies (e.g., 80 Hz)
	affect bass sounds; high frequencies
	(e.g., 8000 Hz) affect treble sounds.
6	Use the Up [		] button to select
	“Channel,” and then use the Left
	and Right [		]/[	] buttons to

select another speaker.

Repeat steps 5 and 6 for each speaker.

7	Press the [SETUP] button.
	The setup menu closes.
	SETUP

Notes:

•When the listening mode is set to Direct or Pure Audio, no effect will be produced.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

71