OPPO Digital DV-987HD user manual Multi-Channel Analog Audio to Receiver

I N S T A L L A T I O N

oAudio Setup Page > Digital Output to “Raw” o Audio Setup Page > HDMI Audio to “Auto”

--- Speaker Setup Page ---

Down-mix	5.1CH
Front Speaker	Large
Center Speaker	Large
Rear Speaker	Large
Subwoofer	On
Channel Delay

--- Audio Setup Page ---
Digital Output	Raw
LPCM Rate	48KHz
Audio Tone	00
Pro Logic II
Dolby Digital Setup
Channel Trim
Audio Delay	05
HDMI Audio	Auto

In this configuration you can enjoy all audio formats using the HDMI connection.

NOTE

HDMI is a wonderful thing. A single cable can transport both audio AND video from your DVD player to your display. Be aware, however, that HDMI is an evolving standard, and there could be compatibility issues. The OPPO DV-981HD supports HDMI 1.1 audio. A receiver that supports HDMI 1.1 is required in order to play multi-channel audio for all formats, including DVD-Video/Audio and SACD (SACD DSD audio converted to multi-channel PCM). If the receiver supports HDMI 1.0 only, DVD-Audio and SACD will NOT be able to be sent via HDMI. To utilize DVD-Audio or SACD, please see next section for multi-channel analogue audio connection.

Multi-Channel Analog Audio to Receiver

If your DVD player is connected to an A/V receiver through the 5.1ch analog audio jacks using 6 RCA cables (as described in “Method 4” on page 11), you can play all supported audio formats and listen to it with your A/V receiver and surround systems. The following setup options are recommended:

•Set the Speaker Setup Page > Down-mix to “5.1CH”.

•Set the speaker size and subwoofer properly according to your actual audio hardware.

•Enable or select the multi-channel analog inputs on your receiver

--- Speaker Setup Page ---

Down-mix	5.1CH
Front Speaker	Large
Center Speaker	Large
Rear Speaker	Large
Subwoofer	On
Channel Delay

Using the multi-channel analog audio output is necessary for playing DVD-Audio and SACD if your receiver does not support HDMI multi-channel audio. This is absolutely worth it if you haven’t yet upgraded to a receiver with HDMI audio. Truly discrete audio channels are a wondrous thing, so enjoy them if you can.

Coaxial or Optical Digital Audio to Receiver

If your audio connection is as described in “Method 5” on page 12 of this guide, and the A/V receiver support Dolby Digital and DTS decoding, the following setup options are recommended:

19