Chapter 3 • Editing Channel Parameters
WMS Unicast
Parameters | Settings | Comments |
|
|
|
External WMS | <None> (default) | No external WMS server |
|
| is used. |
IP address of an external WMS server you may have configured for this channel.
Max Clients | 0 - 10 (default is 10) |
If you wish to use an external WMS server, choose the desired server's IP address from the list. This WMS server must belong to the same workgroup as MGW 2400.
If you do not find the desired server's IP address, go to the External WMS page in order to add it to the Servers list. Refer to page 64 for instructions.
Enter the max. number of clients allowed to receive the stream at the same time.
UDP Block Size 1024 - 20000
(default is 0 for Automatic)
Host URL | For example: |
| mms://MGW2400/Test0 |
We recommend setting the UDP Block Size value to 0 for Automatic.
The UDP Block Size depends on the video and audio
This field shows when the channel is running.
It displays the URL required to configure the Windows Media Player for playing back this channel.
For further information on playing unicast streams and specifying the correct URL, refer to page 93.
Table 32: WMS Unicast Target Parameters
89
