![](/images/new-backgrounds/1281133/281133201x1.webp)
Chapter 3 • Operating Channels
Operating Channels
This section instructs you on transmitting and receiving WMT channels for playback.
To start playing a channel:
1.Log on to MGW 2400 EMS as Administrator or Super User; the MGW 2400 EMS Main window appears with the Modules page open. If you log on as Guest, you cannot operate channels.
2.Click the Channels tab; the Channels page appears.
3.On the Channels page, select the desired channels and click
Play ; the selected channel starts playing. To start
all channels, click Select All and then Play
.
To stop playing a channel:
•On the Channels page, select the desired channel and click
Stop ; the desired channel stops playing. To stop all
channels, click Select All and then Stop
.
Note
•When using an external WMS server for transmission, it may take several minutes until the channel starts or stops playing respectively.
•When starting or stopping channels, a window appears indicating that the relevant command is being processed. If this window does not
close within 5 minutes, click Close and wait until the relevant channels are started or stopped respectively.
91