SETUP
FRONT PANEL
The buttons on the TV/VCR’s front panel control the TV and the VCR.
Installing Batteries
The remote control requires two AA batteries (not supplied). For the longest operation and best performance, we recommend alkaline bat- teries (such as RadioShack Cat. No.
Cautions:
•Use only fresh batteries of the required size and type.
•Never leave dead batteries in the remote control. Batteries can leak chemicals that can damage electronic circuits.
•Dispose of dead batteries promptly and properly; do not bury or burn them.
1.Press down on the battery compartment cover’s tab and lift off the cover.
REMOTE CONTROL
All the remote control’s buttons have the same functions as the buttons on the TV/VCR’s front panel. In addition, the number buttons let you di- rectly select channels and menu options and settings, program, sleep and on timers, and more.
2.Insert fresh batteries into the compart- ment, as indicated by the polarity symbols (+ and
POWER
ON TIMER SLEEP MUTE
PAUSE PLAY REC/TIME
REW |
|
|
| |
ZERO/1 MIN |
| STOP |
| LCR |
1 | 2 | 3 | TRACKING |
|
4 | 5 | 6 | C H | |
7 | 8 | 9 |
|
|
100 | 0 | ADD/DLT |
| VOL |
|
|
|
CLEAR PROG MENU SET
COUNTER SPEED DISPLAY C. C. SEL
RESET SLOW
3. Replace the cover.
Note: If the remote control does not work or op- erates poorly, replace both batteries.
Using the Remote Control
To use the remote control, aim the LED on the front of the remote control toward the front of the TV/VCR and press the desired button(s).
11
