1.Press MENU to display the main menu screen.
2.Repeatedly press SEL 
or SEL 
to select VCR, then press SET.
3.Repeatedly press SEL 
or SEL 
to select BEEPER, then press SET to select
ON or OFF.
4. Press MENU twice to exit.
USING THE TIMER FEATURES
Setting/Cancelling the On Timer
Follow these steps to set the TV/VCR to turn on at a specified time.
1.Press ON TIMER on the remote control. The ON TIMER screen appears.
2.Repeatedly press (or press and hold) SEL
or SEL 
to select the hour when you want the TV/VCR to start playing, then press SET.
Note: Your TV/VCR uses a
3.Repeatedly press (or press and hold) SEL
or SEL 
to select the minute when you want the TV/VCR to start playing, then press SET.
4.Repeatedly press (or press and hold) SEL
or SEL 
to select the channel number you want the TV/VCR to tune to when it turns itself on, or select PLAY if you want the TV/VCR to play a tape when it turns itself on.
Notes:
•If you want to play a tape when the TV/ VCR turns itself on, be sure to insert a cassette tape.
•If an entry is not correct, repeatedly press SET to move forward or CLEAR to move backward to the incorrect entry then correct it.
5.Press ON TIMER. The following screen appears for about 5 seconds, and the ON TIMER indicator lights on the front panel.
The TV/VCR turns itself on at the time you selected.
To cancel the on timer, press ON TIMER to display ON TIMER SET CANCEL: PUSH CLEAR KEY on the TV screen, then press CLEAR within about 5 seconds. ON TIMER END appears on the screen.
Note: After the TV/VCR has been on for 60 minutes, it turns itself off again unless you press any button on the remote control or front panel.
23
