41
The DIRECTION indicator shows
the playback tape direction —
DIRECTION (normal play-
back) or DIRECTION (reverse
playback).
Caution: When the tape in Deck
2 reaches the end during fast-
forward or rewind, press STOP/
EJECT to release the mecha-
nism.
Note:
Deck 1 has a full-release
auto stop system to protect the
tape and prevent pinch roller dam-
age. When the tape reaches the
end during playback, recording,
fast-forward, or rewind, the tape
mechanism in Deck 1 automati-
cally releases.
4. Press STOP/EJECT to stop play-
back at any time.
USING CONSECUTIVE PLAY (DECK 2 TODECK 1)
You can set the tape player to play
both sides of the tape in Deck 2, then
automatically play one side of the tape
in Deck 1.
1. Press in on Deck 2.
2. Press PLAY on Deck 2. The cas-
sette in Deck 2 plays.
3. While t he cassette in Deck 2 is
playing, press PAUS E then PLAY
on Deck 1.
When the cassette in Deck 2 finishes
playing both sides, the cassette tape
in Deck 1 automatically begins play-
back.
USING DOLBY NOISE REDUCTION
The System 745’s cassette Deck uses
the Dolby-B NR (noise reduction) sys-
tem which lowers the level of back-
ground noise or “tape hiss” to one
third of the original level.
When listening to a recording, set
DOLBY NR ON/OFF to the setting used
when it was recorded.
REV MODE
13-1293.fm Page 41 Wednesday, July 14, 1999 6:49 PM