Setup Menu

kAuto Off

dbutton Mz(Setup menu) (A121) MkAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A17) to save power. Once the camera has entered standby mode, the power-on lamp will blink, and if no operations are performed for another three minutes, the camera will turn off.

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

Setup Camera Basic

CCanceling Standby Mode

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

•the power switch

•the shutter-release button

•the Abutton

•the c button

•the b(movie-record) button

CNotes on Auto Off

The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

•When a menu is displayed: If auto off is set to 30 s or 1 min, it is extended to three minutes.

•During slide show playback: up to 30 minutes

• When the AC adapter EH-62F is connected: 30 minutes

133