Steps First

First Steps

Inserting the Battery

Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.

•Charge the battery before the first use or when the battery is running low (A14).

1 Open the battery-chamber/memory card slot cover.

Slide the cover latch to Yside (1) and open the cover (2).

2Insert the battery.

Confirm that the battery’s positive (+) and negative (–) terminals are oriented correctly as shown on the label at the battery chamber opening, and insert the battery.

Use the edge of the battery to push the orange battery latch in the direction indicated by the arrow (1) and fully insert the battery (2).

When the battery is fully inserted, the battery latch will lock it in place.

BInserting the Battery

Inserting the battery upside down or backwards could damage the camera. Be sure to check that the battery is in the correct orientation.

3Close the battery-chamber/memory card slot cover.

Close the cover (1) and slide the cover latch (2) to Z side.

12