Optimus S6000 Error Messages

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display	Problem		Solution	A
O(blinks)	Clock not set.	Set date and time.		124
B	Battery running low.	Prepare to charge or replace		12, 14
		battery.
N	Battery exhausted.	Charge or replace battery.		12, 14
Battery exhausted.
		Turn off camera, and allow
		battery to cool down before
		resuming use. After
		five seconds, this message will
P		disappear, the monitor will
	Battery temperature is	turn off, and the power-on
Battery temperature				17
	high.	lamp will blink rapidly. After
high
		the lamp blinks for three
		minutes, the camera will turn
		off automatically. Pressing the
		power switch also turns off
		the camera.
Q(● blinks red)	Camera cannot focus.	•	Refocus.	26, 27
		•	Use focus lock.	46
P	Camera cannot perform	Wait until message clears			Technical
recording.
Please wait for the	other operations until	from display automatically		–
camera to finish
	recording is complete.	when recording is complete.
					Notes
u	Write-protect switch is	Slide write-protect switch to
Memory card is write				21
	in “lock” position.	“write” position.			and
protected.
P		•	Use approved card.	145	Index
This card cannot be
used.	Error accessing memory	• Check that terminals are		20
			clean.
P	card.
		• Confirm that memory card		20
This card cannot be
			is correctly inserted.
read.

147