Troubleshooting

Index and Notes Technical

Problem

Cause/Solution

A

Date not imprinted on

The current shooting mode is one that does not

 

pictures even when

support Date imprint.

128

Date imprint is enabled.

The date cannot be imprinted on movies.

 

 

 

 

Camera settings reset.

Clock battery is exhausted; all settings were restored to

125

their default values.

 

 

 

Battery temperature is high. Turn off camera and allow

 

Monitor turns off, and

battery to cool down before resuming use. After the

 

the power-on lamp

lamp blinks for three minutes, the camera will turn off

17

blinks rapidly.

automatically. Pressing the power switch also turns off

 

 

the camera.

 

 

 

 

 

The battery is not charged when the camera is

 

 

turned off.

 

Battery inserted into the

Charging stops if the computer enters sleep mode

 

camera is not charged

while the battery is charging. The camera may be

 

when the camera is

turned off.

113

connected to a

Depending upon computer specifications, settings,

 

computer.

and status, it may be impossible to charge the

 

 

battery inserted into the camera via computer

 

 

connection.

 

 

 

 

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

Shooting

Problem

 

Cause/Solution

A

 

When camera is in playback mode, press the

8, 28

 

 

Abutton, the shutter-release button, or the

 

No picture taken when the

b(movie-record) button.

 

shutter-release button is

When menus are displayed, press the d

10

pressed.

button.

 

 

Battery is exhausted.

22

 

When flash lamp blinks, flash is charging.

31

152