GETTING STARTED
BATTERIES
Batteries are supplied with this product:
• | Main unit | 3 x | (AAA) 1.5V |
• | Remote unit | 1 x | (AA) 1.5V |
Insert batteries before first use, matching the polarity as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET after each battery change.
NOTE Do not use rechargeable batteries. Batteries should not be exposed to excessive heat such as sunshine or fire.
shows when batteries are low.
UNIT | LOCATION |
|
|
Main | Weather Forecast Area |
|
|
Remote | Temperature / Humidity Area |
|
|
UV Sensor | UVI / Barometric Pressure Area |
|
|
NOTE It is recommended that you use alkaline batteries with this product for longer performance.
AC ADAPTOR (MAIN UNIT)
The batteries serve as a
Make sure the adaptor is not obstructed and the adaptor socket is easily accessible to the unit.
To be completely disconnected from the power input, the
adaptor should be disconnected from the main unit.
NOTE The main unit and adaptor should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adaptor.
CHANGE SETTINGS
1.Press SELECT to switch between Areas. indicates the selected Area.
2. Most | Areas | have | alternate | display | options |
(for | example, | Clock | / Alarm or | Barometer | / UVI). |
Press MODE to switch options, or ALARM to switch between clock and alarm.
3.Press and hold MODE for 2 seconds to enter setting mode.
4.Press UP or DOWN to change settings.
5.Press MODE to confirm.
REMOTE SENSOR
This product is shipped with RTGN318 / RTGN318D / RTGN318A Thermo / Hygro Sensor. The main unit can collect data from up to 6 sensors (5 Thermo / Hygro Sensors and 1 UV Sensor). (Additional sensors are sold separately. Visit www.oregonscientific.com for additional sensors.)
The RTGN318 / RTGN318D / RTGN318A Sensor collects temperature and humidity readings, and signals from official
SET UP THERMO / HYGRO SENSOR
1. Open the battery compartment.
EN
9
