Oregon Scientific BAR908HGA Set Pre-Alarm, Activate Alarm, Snooze, View Barometer Area

4.Select the hour and minute. Press UP or DOWN to change settings.

5.Press ALARM to confirm.

6. The Daily Alarm icon will appear when the alarm is set.

SET PRE-ALARM

The Pre-Alarm can be set to sound 15, 30, 45, or 60 minutes before the Daily Alarm. It will sound whenever the recorded temperature from Channel 1 Sensor falls to 2°C (35.6°F) or below.

For example, if you set the alarm to 7:00 AM, and the Pre- Alarm to 45 minutes, the Pre-Alarm will sound at 6:15 AM provided the outdoor temperature at Channel 1 Sensor is 2°C or below.

1.Set up and activate the Daily Alarm.

2.Press ALARM to switch to Pre-Alarm view. (PRE-ALwill show at the top.)

3.Press and hold ALARM for 2 seconds.

4. Press UP or DOWN to select 15, 30, 45 or 60 minutes. This is the amount of time the Pre-Alarm will sound BEFORE the Daily Alarm. The Pre-Alarm is automatically activated when you select a time.

5.Press ALARM to confirm. shows when the Pre-Alarm is set.

NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you deactivate the Daily Alarm, the Pre-Alarm is automatically deactivated.

ACTIVATE ALARM

Navigate to the Clock Area, then press ALARM to switch to Daily Alarm or Pre-Alarm view. To activate or deactivate the alarm, press UP or DOWN.

When the alarm time is reached, the backlight will be on for 8 seconds and crescendo alarm will sound for 2 minutes. Press any key (except snooze) to silence the alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE to temporarily disable the alarm for 8 minutes. or will blink while snooze is on.

BAROMETER

This product tracks fluctuations in barometric pressure to provide the weather forecast, and the current and past 24 hours barometric pressure history measurements are recorded by the main (indoor) unit.

VIEW BAROMETER AREA

Press SELECT to navigate to the Barometer Area.

If is NOT shown, press MODE.

Barometric data is shown in 2 areas at the bottom of the display. The upper area shows a 24-hour bar chart. The low area shows current and historical readings.

SELECT MEASUREMENT UNIT

EN

13