Oregon Scientific BAR908HGA user manual UV Measurement, NEW Additional UV Features

NOTE The night time icon displays from 6 PM to 6 AM. When the Channel 1 sensor records a temperature of 2°C (35.6°F) or lower, the RAINY icon becomes

SNOWY.

UV MEASUREMENT

The UVR128 Ultra-Violet Radiation Sensor is available as an optional item for BAR908HG / BAR908HGU / BAR908HGA. The UV sensor gives you the following information at your fingertips:

•10-hour Ultra-Violet Index (UVI) record.

•Automatic calculation of acceptable UV exposure times based on pre-set user profiles (4 users maximum).

•UVI Danger Alert when UV Index reaches unsafe levels.

UV data is shown in the same area as the Barometer. Press SELECT to navigate to the Barometer Area, then press MODE to display the UV icon and data.

NEW ADDITIONAL UV FEATURES

UV EXPOSURE TIME COUNTDOWN

To set the exposure time countdown you need to set the Skin Type and Sun Protection Factor (SPF) as follows:

1.Press SELECT to navigate to the Barometer Area, then press MODE to select the UV display.

EN

2.Press CHANNEL to select user 1-4.

3.Press and hold MODE for 2 seconds to enter the Skin Type Setting Mode of the selected user.

4.Press UP or DOWN to choose 1 of the 4 skin type settings. Then press MODE to confirm and enter the

SPF Set Up Mode.

5.Press UP or DOWN to increase or decrease the SPF value. Then press MODE to confirm and enter the UV Exposure Time Countdown Setting Mode.

6.Press UP or DOWN to enable or disable countdown. Press MODE to exit the UV Exposure Time Countdown Mode and start the exposure time

countdown. The remaining user UV exposure time

will display and the will flash.

7. When the countdown has reached “0”, an alarm will sound for 2 minutes. Press any button to turn the

alarm off. The icon will flash for 2 minutes even if you have stopped the alarm sound.

15