EN
2.Insert the batteries.
3.Set the channel and radio signal format (RTGN318D only). The switches are located in the battery compartment.
SWITCH | OPTION |
|
|
Channel | If you are using more |
| than one sensor, select a |
| different channel for each |
| sensor. |
|
|
Radio Signal | EU (DCF) / UK (MSF) |
Format | (RTGN318D only) |
|
|
4.Press RESET.
5.Close the battery compartment.
For best results:
•Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor.
•Place the sensor out of direct sunlight and moisture.
•Do not place the sensor more than 70 metres
(230 feet) from the main (indoor) unit.
•Position the sensor so that it faces the main
(indoor) unit, minimizing obstructions such as doors, walls, and furniture.
•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.
•Position the sensor close to the main unit during
cold winter months as
10
signal transmission.
NOTE The transmission range may vary and is subject to the receiving range of the main unit.
You may need to experiment with various locations to get the best results.
SENSOR DATA TRANSMISSION
Data is sent from the sensor(s) every 60 Seconds. The reception icon shown in the Temperature / Humidity Area indicates the status.
ICON | DESCRIPTION | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Main unit is searching |
|
|
|
|
|
|
| for sensors. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| At least 1 channel has |
|
|
|
|
|
|
| been found. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sensor 1 is sending |
|
|
|
|
|
|
| data. (The number |
|
|
|
|
|
|
| shows which sensor is |
|
|
|
|
|
|
| selected.) |
|
|
|
|
|
|
|
|
The selected sensor | |||||||
Temperature / | cannot be found. Search | ||||||
Humidity Area | for the sensor or check | ||||||
|
|
|
|
|
|
| batteries. |
|
|
|
|
|
|
|
|
SEARCH FOR SENSOR
To search for a Thermo / Hygro sensor, press SELECT to
navigate to the Temperature / Humidity Area. will show
