Oregon Scientific SE112 user manual Getting Started, Unpacking the Watch, Batteries

GB

GETTING STARTED

UNPACKING THE WATCH

When you unpack your VIBRA-TRAINER PRO fitness watch, make sure to keep all the packing materials in a safe place, in case you need to later transport or return the product for servicing.

In the box, you will find:

Watch	Heart rate chest belt	2x CR2032	User manual
		lithium batteries
		(already installed)

BATTERY

CR2032

User Manual

TURNING ON THE WATCH (First-time use only)

Press any button to activate the LCD Display.

BATTERIES

The VIBRA-TRAINER PRO uses two CR2032 lithium batteries – one for the receiver watch and another for the heart rate chest belt. Both are already installed.

When the watch battery is running low, the low battery indicator displays. The

vibration alert will not work when the battery is too low. VIBRO will display. When the heart rate chest belt battery is exhausted, it stops transmitting signals to the receiver watch.

The batteries typically last one year. We highly recommend that you contact the retailer or our customer service department if you need to replace them. Instructions follow.

To replace the watch battery:

1.Turn the watch over so that you are looking at the back plate.

2.Using a small screwdriver, remove the four screws that hold the back plate into position (Figure 1).

3

SE112_Eng(24/04) 4 5/14/03, 4:04 PM