IBM RS/6000 7025 manual Installing Options5-67

1.Inventory your parts and tools.

a.SSA backplane

b.power cable

c.SSA daisy chain cable (only needed if more than one SSA backplane is installed)

d. one screw (with backplane)

e.SSA adapter f. SSA cables

g. SSA bulkhead connectors with cables

h.SSA documentation

i.Long flat blade screwdriver

j.Three cable retainers.

2. If	you	have	not	already done	so, remove the covers as described in “Remov
Both	the	Front	and	Side Covers”	on page 5-10.

3. Install the SSA adapter, see “Installing Adapters” on page 5-30.

4. Replace the	I/O	planar	cover	as	described in “Replacing the I/O Planar Cove
on page 5-101;	then	return	here	to	determine your next step.

5.If you are installing a backplane in bank D, go to step 6 on page 5-68. If y installing a backplane in bank E, go to step 16 on page 5-75.

Chapter 5. Installing Options5-67