Memory-Modules

You can increase the amount of

memory in your system by installing

 

memory-modules

on to

an

existing

memory adapter card

or

if your

system

has only

one adapter card installed that

is fully

populated,

you

can add an additional memory

adapter card. Your system uses

200-pin, dual inline Error

Correcting

Code

(ECC)

memory modules

(DIMMs)

to

increase system

memory.

 

 

 

 

You install memory-modules into connectors on the memory card located inside the system. The memory card holds up to 8 pairs of memory-modules and your system can have 2 memory cards installed. You can install up to 3GB of addressable ECC memory. The memory-modules sizes available for your system are 32MB, and

128MB.

Attention: Memory modules must be installed in identical pairs.

Attention: Memory modules are sensitive to static electricity discharge. These devices are wrapped in antistatic bags,to prevent this damage. See page 5-3 for information on handling Static-Sensitive Devices.

ŸIf you are adding additional memory or replacing memory to an existing memory

adapter card, see “Adding or

Replacing Memory to an

Existing

Card” on

page

5-25.

 

 

 

Ÿ If

you are adding memory to

a new memory adapter

card,

see step 2 on

page

5-25.

 

 

 

5-24IBM RS/6000 7025 F50 Series User's Guide

Page 168
Image 168
IBM RS/6000 7025 manual Memory-Modules, Ecc