Emergency Eject
Note: Execute the following procedure only in an emergency (tray will not eject although pressing the unload button).
1.Insert a small diameter rod, such as a straightened paper clip, into the emergency eject hole. (Refer to the illustration below for the location of the emergency eject hole.)
2. Push the tool in until some resistance is felt.
3. Maintain a | small amount of pressure on the rod while pulling on the tray with |
your finger | nail. |
4. Pull the tray open and remove the disc.
Note: | Normally the tray makes a ratcheting sound when pulling it open using the |
above | procedure. |
