IBM RS/6000 7025 manual Replacing the Front Covers

Replacing the Front Covers

1. Reinstall the front cover:

Note: Before installing the front cover, verify that the side cover is installe

correctly. If the	side cover is not properly	installed, the front cover
not align correctly	when you attempt to install	it.

a. Align the bottom of the front cover with the bottom of the system.

b. Fit	the front cover's bottom hooks into the grooves located on the bottom o
the	system.

c. Make sure the keylock is in the unlocked position.

d. Pivot	the	front	cover	upward and press	the	top of	the	cover	into	the to
the	system	until	they	snap together and	the	latch on	the	left	side	catch

Chapter 5. Installing Options5-93