![](/images/new-backgrounds/1170225/170225455x1.webp)
To remove a hot swap drive from bank C, D, or E, do the following steps:
1. If | you | have | not already done so, remove the covers as described in “Removing |
the | Front | Covers | Only” on page |
2. Locate the drive you want to remove.
3. Ensure that you have selected the correct drive.
4. Press the | spin down | button | on the drive carrier to remove power from the drive. |
The green | LED should | flash. |
|
5.Unlock the drive by turning the carrier latch 90 degrees clockwise to the open position.