IBM RS/6000 7025 manual Planar Cover

Removing the	I/O	Planar	Cover
1. If	you	have	not	already done	so, remove the covers as described in “Removing
Both	the	Front	and	Side Covers”	on page 5-10.

2. Loosen the three screws (2 turns) on the I/O planar cover and unlatch the cover.

Attention	If	your	system	has	the	SSA	bulkhead	cable installed,	make sure that
you do	not	damage	the	cable	as	you	remove	the I/O planar	cover.

3. Remove the I/O planar cover.

5-16IBM RS/6000 7025 F50 Series User's Guide