IBM RS/6000 7025 manual Removing a Scsi Disk Drive from Bank C, D, or E

Removing a SCSI Disk Drive from Bank C, D, or E

Notes:

Ÿ To locate banks C, D, and E, see the illustration given on page 5-81.

Ÿ You do not have		to	turn off	the	system to	remove a hot-swappable drive
from banks C,	D,	and	E.
The lights on the disk drive			provide status of the drives. See “Disk Drive Statu
States” on page 2-18	for	a	definition	of	the disk	drive status.

Attention:

An application procedure unique to your operating system must be followed which logically removes the drive from the system and spins it down. If you remove a drive while it is in use, your system may lose valuable data.

Chapter 5. Installing Options5-83