6. If you are upgrading a CPU card, remove the installed CPU card:

a. Remove the power cable from the CPU card by squeezing the tabs.

b. The

card

is

secured

in

place with card retainer hooks, one on each end of

the card. Open the card

retainer

hooks

and

remove the

card.

Attention:

To

prevent damage

to

the

card

and

the card

connectors, open

and

close

the

retainer

hooks

at the same time.

 

c. Place the new CPU card in the card guide rails.

d. Make sure that the black tabs on the new card are captured by the retainer hooks.

e. Align the card with the connectors.

f. Close the

retainer

hooks

to

set

the

card.

Attention:

To

prevent

damage

to

the

card and the card connectors, open

and close

the retainer hooks

at the

same time.

g. Connect the power cable to the CPU card.

7.If you are adding a CPU card:

a. Remove the power cable from the existing CPU card by squeezing the tabs.

5-38IBM RS/6000 7025 F50 Series User's Guide

Page 182
Image 182
IBM RS/6000 7025 manual Hooks