IBM RS/6000 7025 manual Cleaning the Mouse

Cleaning the Mouse

1.Remove the retaining ring by turning it counterclockwise, in the direction of arrow as shown in the illustration.

2. Remove the ball.

3. Inspect the ball for contaminants. Wipe it clean with a dry, lint–free cloth.

4.If the ball is dirty, wash it in warm, soapy water. Rinse and wipe the b lint–free cloth until dry.

5.Inspect the ball cavity in the mouse for foreign materials. If there are a materials, remove them.

6.Replace the ball.

7.	Replace		the retaining ring on the mouse		and align it	with	the open slots	in t
	ball	cavity.
8.	Turn	the	retaining	ring clockwise until the	open slots	are	covered and you	hea
	the	ring	snap into	place.

Chapter 2. Using the System2-9Unit