IBM RS/6000 7025 manual Chapter Installing Options5-39

b. Open the retainer hooks on the unused CPU card slot.

c. Remove the connector cover from the unused CPU card slot.

d. Place the new CPU card in the card guide rails.

e. Make sure that the black tabs on the new card are captured by the re hooks.

f. Align the card with the connectors.

g. Close the retainer hooks to set the card.

Attention:	To prevent damage to	the card and the card connectors, open
and close	the retainer hooks	at the same time.

h. Connect the power cable to each of the CPU cards.

i. Ensure

that

the

power

cables come

out

vertically

from the

power

supply an

that

they

are

pushed

back

and

out

of

the way

so

that

the I/O

planar

can be

installed.

8. If

you

have

other

procedures

to

perform,

refer

to

“Option

List”

on

page 5-1

9. If

you

do

not

have

any

other

procedures

to perform, replace the I/O plana

as described in “Replacing the

I/O

Planar

Cover”

on

page 5-101; then

return

here

to

determine

your next step.

Chapter

5. Installing Options5-39